Solar Powered Battery Charging System by Using Arduino: Experimental design

Authors

  • Abhishek Muthyala Department of Electrical and Electronics Engineering, Swinburne University of Technology, Hawthorn VIC 3122, Australia.

DOI:

https://doi.org/10.62760/iteecs.2.2.2023.49

Keywords:

Solar PV system, Battery storage system, Charge controller, Arduino

Abstract

In recent years, the need for efficient and sustainable energy solutions has become increasingly important. One potential solution is the use of solar power for battery charging systems. In this project, an Arduino-based solar-powered battery charging system is designed and implemented. The system consists of a solar panel that collects energy from the sun, an Arduino microcontroller that regulates the battery's charging, and a battery that stores the energy for later use. The solar panel converts sunlight into DC electrical energy, which is then fed to the battery through a charging circuit. The implementation of this system is fairly straightforward. The solar panel is connected to an input pin of the Arduino microcontroller, which then controls the charging of the battery through a charging circuit connected to an output pin. The charging circuit is designed to limit the charging current and voltage to prevent damage to the battery.

References

M. Shubhankar and D. Singh "Real time data acquisation of solar panel using arduino and further recording voltage of the solar panel", International Journal of Instrumentation and Control Systems, Vol. 7, No. 3, pp. 15-25, 2017.

A. K. Singh, A. K. Agrawal, S. Vohra, S. S. Thakur & G. Patel "Solar charge controller", International Journal of Academic Research and Development, Vol. 2, No. 6, pp. 994–1001, 2017.

R. Shetty, A. Upadhyay, M. Shinde, C. Rajput, & P. M. Jha "Photovoltaic Charge Controller Using MPPT Algorithm", International Journal of Engineering and Technical Research, Vol. 2, No. 12, pp. 106– 109, 2014.

N. F. H. Mond, M. F. Yaakub, I. N. A. M. Nordin, N. ahari, N. A. Zambri, S. S. Yi, and M. S. M. Saibon "Development of solar panel cleaning robot using Arduino", Indonesian Journal of Electrical Engineering and Computer Science, Vol. 19, No. 3, pp. 1245-1250, 2020.

N. J. A. Mohd "Photovoltaic Charge Controller", Universiti Malaysia Pahang 2009.

M. Ferdausi "Designing Charge Controller for the Solar Battery Charging Station", BRAC University, Dhaka 2012.

M. Tulika, R. Deka, S. Roy and B. Goswami. "Solar charge controllers using MPPT and PWM: A review", ADBU Journal of Electrical and Electronics Engineering, Vol. 2, No. 1, pp. 1-4, 2018.

J. N. Ingole, M. A. Choudhary, and R. D. Kanphade "PIC based solar charging controller for battery", International Journal of Engineering Science and Technology, Vol. 4, pp. 384-390, 2012.

R. M. Atiqur, M. A. Matin, A. Sarker, and M. R. Uddin. "A Cost Effective Solar Charge Controller", International Journal of Research in Engineering and Technology, Vol. 4, No. 3, pp. 314-319, 2015.

T. Z. Ni, A. T. Naing and H. M. Tun "Design And Construction of Microcontroller Based Solar Battery Charger", International Journal of Scientific & Technology Research, Vol. 5, No. 06, pp. 117-120, 2016.

E. Irmak, A. Köse and G. Göçmen "Simulation and ZigBee based wireless monitoring of the amount of consumed energy at smart homes", In: IEEE International Conference on Renewable Energy Research and Applications, Birmingham, pp. 1019-1023, 2016.

M. Moghimi, C. Bennett, D. Leskarac, S. Stegen, J. Lu. "Communication architecture and data acquisition for experimental MicroGrid installations", In: Power and Energy Engineering Conference IEEE PES Asia-Pacific pp. 1-5, 2015.

C. E. Ortiz, J. F. A. Rada, E. Hernández, J. Lozada, A. Carbajal, H. J. Altuve "Protection Control Automation and Integration for Off-Grid Solar-Powered Microgrids in Mexico", In: Technical Report, Greenergy and Schweitzer Engineering Laboratories, Inc., 2013.

J. Mohammed, A. Thakral, A. F. Ocneanu, C. Jones, C. H. Lung, A. Adler "Internet of Things: Remote Patient Monitoring Using Web Services and Cloud Computing", In: IEEE International Conference on Internet of Things, Green Computing and Communications 2014.

E. Elazab, T. Awad, H. Elgamal and B. Elsouhily "A cloud based condition monitoring system for industrial machinery with application to power plants", In: Nineteenth International Middle East Power Systems Conference, pp. 1400-1405, 2017.

C. Lefeng, Z. Zhang, H. Jiang, T. Yu, W. Wang, W. Xu, and J. Hua "Local energy management and optimization: A novel energy universal service bus system based on energy Internet technologies", Energies, Vol. 11, No. 5, art.no. 1160, 2018.

Additional Files

Published

2023-06-30

How to Cite

Muthyala, A. (2023). Solar Powered Battery Charging System by Using Arduino: Experimental design. International Transactions on Electrical Engineering and Computer Science, 2(2), 52–59. https://doi.org/10.62760/iteecs.2.2.2023.49

Issue

Section

Articles

Similar Articles

1 2 3 4 > >> 

You may also start an advanced similarity search for this article.