Wall Follower Based Fire Extinguisher Wheeled Robot Prototype using 5 Channel Fire Sensor

Authors

  • Muhammad Aldenio Department of Electrical Engineering, Universitas Swadaya Gunung Jati, Cirebon - 45132, Indonesia. https://orcid.org/0009-0001-3975-4104
  • Hildan Firmansyah Zailani Department of Electrical Engineering, Universitas Swadaya Gunung Jati, Cirebon - 45132, Indonesia. https://orcid.org/0009-0002-1288-0415
  • Muhamad Riyad Ariwibowo Department of Electrical Engineering, Universitas Swadaya Gunung Jati, Cirebon - 45132, Indonesia.

DOI:

https://doi.org/10.62760/iteecs.3.3.2024.96

Keywords:

Fire, Robot, 5 Channel fire sensor, Mini Pump DC, HC - SR04

Abstract

Fires can occur anywhere, be it in schools, offices, and housing or other open spaces. Fire cannot be predicted when it will happen. In the modern era robots are one of the very special technologies, the benefits of these robots can facilitate human work. Robot cars in this era are attracting quite a lot of attention from experts to develop. Therefore, the author designed a "Wall Follower-based Fire Extinguishing Robot using a 5 Channel fire sensor" to reduce the risk of fire. This robot uses the HC-SR04 sensor to detect the barrier wall so that the extinguishing robot reaches the fire point. For the microcontroller tool used in this design system in the form of an Arduino Nano microcontroller which functions as part of the 5 Channel Flame Sensor controller to detect hotspots and a DC water pump to extinguish the fire. In this study using experimental research. This robot has successfully passed the track and put out the fire as the author has designed. The average flame sensor on this robot can read the fire point at a distance of 20 cm with angles of 90°, 60°, 120°, 150°, then the output voltage generated on the DC motor with a PWM value of 191 or 75% duty cycle produces an output of 8.77V measured using a multimeter, and this robot can extinguish the fire on the track with different distances with an average fire extinguishing time of 7.1 seconds.

References

K. K. McLauchlan et al., “Fire as a fundamental ecological process: Research advances and frontiers,” Journal of Ecology, Vol. 108, No. 5, pp. 2047–2069, Sep. 01, 2020.

https://doi.org/10.1111/1365-2745.13403

G. F. Albery, I. Turilli, M. B. Joseph, J. Foley, C. H. Frere, and S. Bansal, “From flames to inflammation: how wildfires affect patterns of wildlife disease,” Fire Ecology, Vol. 17, pp. 1–17, Dec. 2021.

https://doi.org/10.1186/s42408-021-00113-4

M. Zakaria, M. P. Tambunan, and H. Setiadi, “Distribution of Fire Incidents and Fire Fighting Services in DKI Jakarta Province,” Journal of Geography of Tropical Environments) Tropical Environments), Vol. 7, No. 1, pp. 1–12, 2023.

https://doi.org/10.7454/jglitrop.v7i1.140

J. Sjöström and A. Granström, “Human activity and demographics drive the fire regime in a highly developed European boreal region,” Fire Safety Journal, Vol. 136, pp. 1–11, Apr. 2023.

https://doi.org/10.1016/j.firesaf.2023.103743

O. C. Oloke, A. O. Oluwatobi, A. Oni, and D. Oke, “Assessment of causes and control of fire disaster in Arepo neighbourhood, Ogun State, Nigeria,” IOP Conference Series: Earth and Environmental Science, Vol. 993, No. 1, pp. 1–9, Mar. 2022.

http://doi.org/10.1088/1755-1315/993/1/012004

M. A. Hassanain, M. Al-Harogi, and A. M. Ibrahim, “Fire Safety Risk Assessment of Workplace Facilities: A Case Study,” Frontiers in Built Environment, Vol. 8, pp. 1–9, Mar. 2022.

https://doi.org/10.3389/fbuil.2022.861662

O. Ayu, P. Sari, and E. D. Noorratri, “The Relationship between Knowledge Level and Fire Disaster Preparedness,” General Nursing Science Journal, Vol. 4, No. 1, pp. 243–249, 2023.

https://doi.org/10.56359/gj.v4i1.245

F. Aprianti, P. Dayurni, L. E. W. Fajari, D. Pernanda, and R. Meilisa, “The Impact of Gadgets on Student Learning Outcomes: A Case Study in Indonesia Junior High School Students,” International Journal of Education, Information Technology, and Others, Vol. 5, No. 5, pp. 121–130, 2022.

https://doi.org/10.5281/zenodo.7446724

A. Haleem, M. Javaid, M. A. Qadri, and R. Suman, “Understanding the role of digital technologies in education: A review,” Sustainable Operations and Computers, Vol. 3, pp. 275–285, Jan. 2022.

https://doi.org/10.1016/j.susoc.2022.05.004

X. Cai et al., “Robot and its living space: A roadmap for robot development based on the view of living space,” Digital Communications and Networks, Vol. 7, No. 4, pp. 505–517, Nov. 2021.

https://doi.org/10.1016/j.dcan.2020.12.001

M. Javaid, A. Haleem, R. P. Singh, and R. Suman, “Substantial capabilities of robotics in enhancing industry 4.0 implementation,” Cognitive Robotics, Vol. 1, pp. 58–75, Jan. 2021,

https://doi.org/10.1016/j.cogr.2021.06.001

M. Soori, B. Arezoo, and R. Dastres, “Artificial intelligence, machine learning and deep learning in advanced robotics, a review,” Cognitive Robotics, Vol. 3, pp. 54–70, Jan. 2023.

https://doi.org/10.1016/j.cogr.2023.04.001

R. Raj and A. Kos, “A Comprehensive Study of Mobile Robot: History, Developments, Applications, and Future Research Perspectives,” Applied Sciences, Vol. 12, No. 6951, pp. 1–26, Jul. 2022.

https://doi.org/10.3390/app12146951

J. T. Licardo, M. Domjan, and T. Orehova?ki, “Intelligent Robotics—A Systematic Review of Emerging Technologies and Trends,” Electronics (Basel), Vol. 13, No. 542, pp. 1–44, Feb. 2024.

https://doi.org/10.3390/electronics13030542

P. Kah, M. Shrestha, E. Hiltunen, and J. Martikainen, “Robotic arc welding sensors and programming in industrial applications,” International Journal of Mechanical and Materials Engineering, Vol. 10, No. 13, pp. 1–16, Dec. 2015.

https://doi.org/10.1186/s40712-015-0042-y

A. M. Zaki, O. Arafa, and S. I. Amer, “Microcontroller-based mobile robot positioning and obstacle avoidance,” Journal of Electrical Systems and Information Technology, Vol. 1, pp. 58–71, May 2014,

https://doi.org/10.1016/j.jesit.2014.03.009

K. M. Raza, M. Kamil, and P. Kumar, “Speed Control of DC Motor by using PWM,’” International Journal of Advanced Research in Computer and Communication Engineering, Vol. 5, No. 4, pp. 307–309, 2016.

[Cross Ref]

T. Suhendra, S. Nugraha, H. A. Kusuma, Rusfa, H. A. Nugraha, and S. Refly, “Effect of Pulse Width Modulation on Proportional, Integral, and Derivative Coefficient Characteristics,” PROtek?: Jurnal Ilmiah Teknik Elektro, Vol. 10, No. 2, pp. 93–101, May 2023.

https://doi.org/10.33387/protk.v10i2.5033

T. Liu et al., “Influence of Water Mist Temperature Approach on Fire Extinguishing Effect of Different Pool Fires,” Processes, Vol. 10, No. 1549, pp. 1–13, Aug. 2022.

https://doi.org/10.3390/pr10081549

S. Chitti, P. R. Rao, C. Padmaja, and D. R. Kumari, “Fire Detection and Direction Control of Fire Fighting Robot,” IOP Conf Ser Mater Sci Eng, vol. 981, pp. 1–5, Dec. 2020.

https://doi.org/10.1088/1757-899X/981/3/032016

Downloads

Published

2024-09-30

How to Cite

Aldenio, M., Zailani, H. F., & Ariwibowo, M. R. (2024). Wall Follower Based Fire Extinguisher Wheeled Robot Prototype using 5 Channel Fire Sensor. International Transactions on Electrical Engineering and Computer Science, 3(3), 128–134. https://doi.org/10.62760/iteecs.3.3.2024.96

Issue

Section

Articles